press CTLR+F1 to access all settings
You need to set:
DDR2 Overvoltage Control ____________ +0.3 <—— Your Corsairs needs 2.1V to run at specified speeds.
Performance Enhance ____________ Turbo — Set to STANDARD
System Memory Multiplier (SPD) ____________ Auto – Need to be MANUAL, otherwise u cant set the timings manual.
CAS Latency Time________________ 4
Dram RAS# to CAS# Delay_________ 4
Dram RAS# Precharge Delay_______4
Precharge Delay (tRAS)__________ 12
For NO overclocking u can likely leave the rest of the timings on AUTO
(G)MCH Overvoltage Control ____________ NORMAL — set to +0.1 – four sticks (populating all four slots likely to need more volts)